STADLER Group, the globally active German company specialized in the planning, production and assembly of turnkey sorting plants, has acted as technology partner to IGERS s.r.l. in the development of its new textile recycling plant in San Pietro Mosezzo, in the province of Novara, Piedmont. STADLER supported IGERS throughout the design phase, from the earliest discussions on process requirements through to a plant layout designed to fit the existing building. It integrated key treatment equipment purchased by IGERS so that the individual process steps work together as one system, and designed and supplied the fully automated sorting line.
“STADLER worked with us not simply as a supplier, but as a technology partner, understanding the specific requirements of a project that is both new and ambitious within the Italian context,” says Gian Luca Miceli, CEO of IGERS.
Inaugurated on 21 September 2026, the San Pietro Mosezzo facility is the first plant in Italy to include all treatment phases of textile recycling, producing high-quality flakes and frayed material suitable for the spinning industry from post-consumer and post-industrial textile waste, with full traceability throughout the entire process. It has a capacity of 4 t/h and is authorized to process up to 19,200 tonnes of textile waste per year. The total investment amounts to approximately €8 million, with €1.3 million in co-financing from Italy’s National Recovery and Resilience Plan (PNRR). The plant comes at a time when textile recycling is gaining increasing importance across Europe. New requirements for separate textile collection and Extended Producer Responsibility are increasing the need for industrial solutions capable of sorting and preparing textile waste for high-quality recycling.
A patented process for a complex waste stream
Textile waste is highly heterogeneous, combining different fibers, composite materials, accessories and contamination, with widely varying quality levels. At the same time, there is a growing need for transparency about how material is sorted and its final destination. IGERS has responded by designing a complete process of its own, patented in Italy, that runs from the initial buffer through sanitizing, sorting and tearing to the final output.
“The distinctive value of our process lies in the integration of impurity separation, technology-based material sorting, mechanical regeneration and digital traceability,” explains Gian Luca Miceli. “We do not consider these stages as isolated activities: they are parts of a single system that enables more accurate decisions to be made about the destination of each material stream.”
“The opening of the San Pietro Mosezzo plant represents IGERS’ transition from vision to industrial capability,” he adds.
A reliable partner for an emerging sector
Textile recycling is a sector still in its early stages, with limited prior knowledge to draw on. Developing an industrial solution for textile recycling requires not only sorting technology, but also extensive expertise in plant engineering, material handling and system integration.
“We chose STADLER because we were looking for a partner with international experience and a proven ability to translate complex requirements into a reliable engineering solution,” says Gian Luca Miceli. “In a project like this, technology is fundamental, but technology alone is not enough: you also need a structured approach, responsiveness, rigorous interface management and attention to detail.”
The project called for a significant coordination effort to bring together all the suppliers involved and harmonize the existing components, as well as a plant design offering maximum flexibility in sorting operations.
“IGERS approached us looking for a reliable partner who could turn their ideas into a real, scalable industrial solution,” says Matteo Zaninelli, Project Manager at STADLER. “At the beginning, we focused mainly on the process: what IGERS wanted to achieve, the characteristics of the material and the required outputs. From there, we started developing the flow diagrams, selecting the most suitable equipment and finally, designing the complete layout around the available building. It was very much a step-by-step development, with IGERS bringing its knowledge of textile recycling and STADLER contributing its experience in plant engineering, material handling and sorting.”
Joining forces to tackle an unpredictable material
“Textiles present very specific handling challenges,” explains Matteo Zaninelli. “They are soft and flexible; they come in many different shapes and sizes; and they can fold, overlap or become entangled.”
Understanding how the material behaves was a joint effort. STADLER carried out extensive trials at its Test Center, while IGERS conducted many tests of its own and shared considerable practical knowledge. The results helped define the most suitable configurations for feeding, dosing, conveying and distributing textiles throughout the plant. The positioning of the dosing units and the design of their distribution hoppers were specifically studied around the behavior of textile material. “These may seem like relatively small details, but they have a significant impact on the stability of the material flow and therefore on the performance of the entire sorting process,” Zaninelli notes.
One integrated system with two-stage NIR sorting
The STADLER sorting line comprises two dosing units, two TOMRA NIR optical sorters and 16 conveyors. Its main role is to prepare textile material for the subsequent recycling stages. The quality of separation is particularly important, as different textile fractions may have different destinations and require different downstream treatments. The line also provides a continuous, homogeneous material flow, creating more stable conditions for the downstream equipment and supporting both process efficiency and the quality of the final fractions.
In the initial sorting stage, the first NIR sorter separates pure textiles, such as 100% cotton or 100% wool, from blended textiles and impurities. While the high-value pure fractions are stored in a buffer, the second NIR sorter separates the mixed textile stream from impurities and non-conforming materials, such as pieces of hangers and leather. In the second stage, the buffered material is recirculated through the same sorting equipment, with the NIR sorters configured to separate it according to fiber type.
Flexibility, one of IGERS’ key requirements, was built in from the start. The plant is designed to handle different incoming textile streams and throughputs, while giving IGERS the freedom to decide what happens to each output fraction – whether it goes to the baler, one of several storage containers, a recirculation buffer, or the fiber-opening process. “This gives IGERS the possibility to adapt the plant to different materials and sorting strategies, which is particularly important in a market that is still evolving rapidly,” says Zaninelli. The line is fully automated and requires just one plant manager, who starts and stops it and adjusts the NIR sorters’ settings as needed.
Building the foundations for textile circularity
“Our objective is to consolidate San Pietro Mosezzo as a leading industrial and technological platform,” says Miceli. “Building on this foundation, we intend to progressively develop additional recycling hubs, in line with the availability of material streams, regional requirements and demand for high-quality recovered materials.”
For STADLER, the IGERS project builds on experience gained through previous textile sorting projects, combined with its extensive expertise in plant engineering and system integration. The project further strengthens STADLER’s know-how in developing integrated solutions for textile sorting and recycling.
“The plant built for IGERS demonstrates that textile recycling requires not only high-performance machinery, but also a strong ability to integrate different technologies, specialized engineering expertise, and a plant design capable of adapting to complex and variable material flows,” says Matteo Zaninelli. “In this sense, the project is a concrete example of how we can support the development of industrial infrastructure for a sector that is expected to grow rapidly in the coming years.”
“We expect textile sorting and recycling to become increasingly industrialized,” he concludes. “Sorting technology has to develop together with the recycling processes it is feeding. Ultimately, our job is not simply to separate textiles, but to provide downstream processes with the right material, at the right quality, and in a consistent way.”
About STADLER
Founded in 1791, the STADLER Group is a global leader in the planning, production, and assembly of state-of-the-art sorting systems and components for the recycling industry. The company delivers tailor-made turnkey solutions covering every stage – from conceptual design and engineering to installation, modernization, and servicing. Its product range includes ballistic separators, conveyor belts, trommel screens, label removers, bale dewiring units, air drum sifters as well as steel structures and electrical switch cabinets for complete recycling plants. Through its AI-powered STADLERconnect platform, STADLER combines mechanical engineering excellence with digital intelligence, enabling real-time data insights, predictive analytics, and process optimization for greater efficiency and sustainability. STADLER also operates Test and Innovation Centers in Europe, supporting research and providing customers with simulations of sorting processes to optimize performance.
Built on a long-standing family tradition, STADLER remains committed to quality, reliability, and customer satisfaction, while investing in its people and maintaining a strong culture of responsibility and social commitment. The company continues to shape the future of recycling through innovation, precision, and sustainable progress. For more information, visit http://www.w-stadler.de
STADLER Anlagenbau GmbH: Facebook @StadlerInternational, X @Stadler_Group, Instagram @stadler_group, LinkedIn @STADLER Group and YouTube @StadlerGroup.
